WEKO3
アイテム
Real-time ultrasonic measurement during tensile testing of aluminum alloys
https://sucra.repo.nii.ac.jp/records/12481
https://sucra.repo.nii.ac.jp/records/12481b5b04872-40b6-483e-bb9f-4385785abffc
名前 / ファイル | ライセンス | アクション |
---|---|---|
A1000505.pdf (615.1 kB)
|
|
Item type | 学術雑誌論文 / Journal Article(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2007-03-08 | |||||
タイトル | ||||||
タイトル | Real-time ultrasonic measurement during tensile testing of aluminum alloys | |||||
言語 | ||||||
言語 | eng | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | journal article | |||||
著者 |
加藤, 寛
× 加藤, 寛× 蔭山, 健介 |
|||||
著者 ローマ字 | ||||||
値 | Kato, Hiroshi | |||||
著者 ローマ字 | ||||||
値 | Kageyama, Kensuke | |||||
著者 ローマ字 | ||||||
値 | Min, Xiao-Hua | |||||
著者 ローマ字 | ||||||
値 | Narisawa, Nobuyuki | |||||
著者 所属 | ||||||
値 | 埼玉大学大学院理工学研究科 | |||||
著者 所属 | ||||||
値 | 埼玉大学大学院理工学研究科 | |||||
著者 所属(別言語) | ||||||
値 | Graduate School of Science and Engineering, Saitama University | |||||
著者 所属(別言語) | ||||||
値 | Graduate School of Science and Engineering, Saitama University | |||||
書誌情報 |
Materials science and engineering. A, structural materials properties microstructure and processing 巻 392, 号 Jan. 2, 発行日 2005 |
|||||
年月次 | ||||||
値 | 2005 | |||||
出版者名 | ||||||
出版者 | Elsevier | |||||
収録物識別子 | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 09215093 | |||||
DOI | ||||||
関連タイプ | isVersionOf | |||||
識別子タイプ | DOI | |||||
関連識別子 | info:doi/10.1016/j.msea.2004.10.019 | |||||
関連サイト | ||||||
内容記述タイプ | Other | |||||
内容記述 | http://www.sciencedirect.com/science/journal/00255416 | http://www.sciencedirect.com/science/journal/00255416 | |||||
抄録 | ||||||
内容記述タイプ | Abstract | |||||
内容記述 | A real-time ultrasonic measurement was carried out for aluminum alloy (A2024-T3) specimens during tensile testing with local immersion method by using a water bag to obtain ultrasonic parameters. The sound velocity increased with increasing strain in the elastic deformation, and then decreased with increasing plastic strain during tensile testing. From a relation between the sound velocity and the elastic strain, the acousto-elastic constant was calculated to be 8.5×10-6 MPa-1. The surface roughness and the hardness were measured for specimens taken out from testing machine after required strain. The peak intensity of the bottom echo spectrum and the average gradient of the transfer function (AGTF) obtained from the bottom echo spectrum decreased with increasing plastic strain. The decrease in the ultrasonic parameters was explained rom the change in the dislocation density and arrangement by using Granato and Luecke string model. The peak frequency of the bottom echo spectrum did not change with increasing plastic strain. The ultrasonic parameters were measured off-line with specimens taken out from testing machine after required strain by the conventional immersion method, and decreased with increasing plastic strain as those obtained in real-time. When specimens were annealed, the hardness continuously decreased with increasing annealing time, and the yield strength and the sound velocity slightly increased after smaller annealing time, and then decreased with increasing annealing time. For annealed specimens, the peak intensity and AGTF obtained by the real-time measurement also decreased with increasing plastic strain, and the rates of the ultrasonic parameters increased with increasing annealing time. | |||||
版 | ||||||
値 | [著者版] | |||||
出版タイプ | ||||||
出版タイプ | AM | |||||
出版タイプResource | http://purl.org/coar/version/c_ab4af688f83e57aa | |||||
資源タイプ | ||||||
内容記述タイプ | Other | |||||
内容記述 | text | |||||
フォーマット | ||||||
内容記述タイプ | Other | |||||
内容記述 | application/pdf | |||||
作成日 | ||||||
日付 | 2007-03-05 | |||||
日付タイプ | Created | |||||
アイテムID | ||||||
値 | A1000505 |